60
Administration Guide
Daylight Saving
Resync Period
Enabling Remote Access
Click Remote Access to enable the remote access feature.
FIGURE 68
Remote Access
Control
Remote Address
Upgrading the BiGuard S10 Firmware
Periodic firmware updates are available from the BiGuard registration web site:
www.biguard.com.
Click Firmware Upgrade to upgrade the firmware.
FIGURE 69
Check this box to allow the BiGuard S10 to automatically adjust for day-
light saving time.
Type the number of minutes that will elapse before the BiGuard S10
adjusts the time.
E
R
NABLING
EMOTE
Select the remote access scenario you want from the list.
Select the remote IP address which will be allowed access from the drop-
down menu.
WARNING:
I
'
T
S RECOMMENDED IF YOU ALLOW REMOTE CONFIGURATION
CONFIGURE IT ONLY FOR A SPECIFIC
SHOULD ONLY BE AVAILABLE TO YOUR ADMINISTRATOR
Extender IP address range
U
PGRADING THE FIRMWARE
A
CCESS
IP
. T
ADDRESS
HE SPECIFIED
77.
ON PAGE
,
THAT YOU
IP
ADDRESS
. S
Modifying the Network
EE