Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Billion SG6300NZL
Summary of Contents for Billion SG6300NZL
- Page 1 SG6300NZL Quick Start Guide www.billion.com.tw www.smartgrid.com.tw...
- Page 2 Chapter 1: SG6300NZL Hardware Installation 1.1 SG6300NZL Overview 1.2 Internet Installation 1.3 ZigBee Pairing 1.4 RS485 Installation Chapter 2: Network Configuration 2.1 Configuring a PC in Windows 7 Chapter 3: Factory Default Settings Chapter 4: Information from your ISP Chapter 5: Configuring internet with your Web Browser...
-
Page 3: Chapter 1: Sg6300Nzl Hardware Installation
Chapter 1: SG6300NZL Hardware Installation 1.1 SG6300NZL Overview SG6300NZL Front Panel LEDs Green: Power ON Power Red: System failure. Restart the device or contact Lit up: Successfully connected with a broadband connection device Blinking: Data being transmitted/received Lit up: Successfully connected with a broadband connection device... - Page 4 Off: No LTE module Green: Connect to internet Internet Orange: Disconnect to internet SG6300NZL Rear Panel RS485 Connect to RS485 device SD Card Data storage Data storage WAN 10/100M Ethernet port (with auto crossover support); connect Cable modem here. Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the LAN ports when connecting to a PC or an office/home network of 10Mbps or 100Mbps.
- Page 5 1.2 Internet Installation EWAN Installation SG6300NZL’s port connects to backbone router’s port. Please refer 5.1 Internet connection configuration by Quick Start to set internet. 4G LTE Installation Insert the SIM card with the gold contact facing down. Please refer 5.1 Internet connection configuration by Quick Start to set internet.
- Page 6 If Status LED lit green that mean ZigBee Meter is waiting mode, please go STEP 3 If Status LED blinking green that mean ZigBee Meter has been pair other SG6300NZL, Before pair ZigBee Meter with SG6300NZL, please refer ZigBee Meter UM to do un-pairing.
- Page 7 Install SG3010S in the real side, ensure meter power ON. STEP_2 SG3010S’s RS485+ connect to SG6300NZL’s RS485+ SG3010S’s RS485- connect to SG6300NZL’s RS485- STEP_3 Access to SG6300NZL’s WEB GUI to configure your ZigBee Device Please refer 7.1 RS485 Configuration www.billion.com.tw www.smartgrid.com.tw...
-
Page 8: Chapter 2: Network Configuration
Control Panel. Then click on Network and Internet. When the Network and Sharing Center window pops up, select and click on Change adapter settings on the left window panel. Select Local Area Connection, and right click icon select Properties. www.billion.com.tw www.smartgrid.com.tw... - Page 9 In the TCP/IPv4 properties window, select the Obtain address automatically and Obtain Server address automatically radio buttons. Then click OK to exit the setting. Click OK again in the Local Area Connection Properties window to apply the new configuration. www.billion.com.tw www.smartgrid.com.tw...
-
Page 10: Chapter 3: Factory Default Settings
Chapter 3: Factory Default Settings Before configuring the Billion SG6300NZL router, you need to know the following default settings. Web Interface: (Username and Password) Username: admin Password: admin The default username and password are “admin” and “admin” respectively. Device LAN IP settings IP Address: 192.168.5.254... -
Page 11: Chapter 4: Information From Your Isp
DHCP Client (it can be automatically assigned by your ISP Obtain an IP Address when you connect or be set manually). Automatically IP address, Subnet mask, Gateway address, and Domain Fixed IP Address Name System (DNS) IP address (it is fixed IP address). www.billion.com.tw www.smartgrid.com.tw... -
Page 12: Chapter 5: Configuring Internet With Your Web Browser
Chapter 5: Configuring Internet with your Web Browser Open your web browser, enter the IP address of your SG6300NZL, which by default is 192.168.5.254, and click “Go”, a user name and password window prompt appears. Enter the user name and password that your Administrator has set for you and select the Account Type, then click Login. - Page 13 Suggest do not change the password. STEP_2 Time Zone Choose your time zone. Click NEXT to continue. STEP_3 Wireless Set up your wireless connection if you want to connect to the Internet wirelessly on your PCs. Click NEXT to continue. www.billion.com.tw www.smartgrid.com.tw...
- Page 14 4.1 Select an appropriate WAN connection protocol then click NEXT to continue. Input all relevant 3G/4G-LTE parameters from your ISP. 4.2 If selected EWAN If selected PPPoE, please enter PPPoE account information provided by your ISP. Click NEXT to continue. Or, others protocol assigned by your ISP. www.billion.com.tw www.smartgrid.com.tw...
- Page 15 If selected Dynamic IP Address. When connecting to the ISP, Billion SG6300NZL also functions as a DHCP client. Billion SG6300NZL can automatically obtain an IP address, subnet mask, gateway address, and DNS server addresses if the ISP assigns this information via DHCP.
-
Page 16: Chapter 6: Energy Management With Zigbee Device
Chapter 6: Energy Management with ZigBee device SG6300NZL build basic energy management application on WEB GUI, user can monitor real time power information and remote control power meter on the WEB GUI. 6.1 ZigBee Configuration Once ZigBee Meter joined ZigBee Network, this page will show on ZigBee information. - Page 17 Show the Signal Strength between ZigBee nodes and next ZigBee nodes. Power information: Show Power information include as below Voltage, Current, Frequency, PF, Active Power, Apparent Power, Mainenergy. When you click blue link you will see detail power information. www.billion.com.tw www.smartgrid.com.tw...
-
Page 18: Chapter 7: Energy Management With Rs485 Device
Chapter 7: Energy Management with RS485 device 7.1 RS485 Configuration Advance->Power Management-> RS485 Config Set Baud Rate for RS485 used. Set the RS485 device to each ID, please ensure all RS485 devices already connect to SG6300NZL. www.billion.com.tw www.smartgrid.com.tw... - Page 19 Show current relay status of RS485 Meter. ON: Relay ON OFF: Relay OFF N/A: Not support relay feature Success: The number of SG6300NZL reads RS485 device success. Retry: The number of SG6300NZL re-reads RS485 device. Reset: Reset the number of success and retry.