Setting Policy Parameters; Enabling Packet Filtering; Figure 56 Packet Filtering Table; Figure 57 Creating A Packet Filtering Profile - Billion BiGuard S10 Administration Manual

Setting Policy parameters

Click Policy to set up packet filtering, the virtual server, and Ethernet MAC and content filtering.

Enabling Packet Filtering

Click Packet Filtering to display a list of packet filter items.
FIGURE 56
Packet filtering enables you to restrict types of data from being transmitted over the network.
Click Create to add a new parameter to the list.
FIGURE 57
Name
Active
Packet Flow
Action
Service
P F
ACKET ILTERING TABLE
C P F
REATING A ACKET ILTERING PROFILE
Type the name for this profile.
Check Enable to make this profile active.
Select the packet flow direction from the drop-down menu.
• LAN to WAN: filters packets being transmitted to the WAN from the
LAN.
• WAN to LAN: filters packets being transmitted to the LAN from the
WAN.
Check Reverse Direction to apply the same rule with reverse packet flow.
(i.e., both directions)
Select the action to be applied to the packets from the drop-down menu.
• Drop: discards the packets.
• Forward: sends the packets to a specified address.
Select which services this filter will be applied to from the drop-down
menu.
Configuring the BiGuard S10 53