Creating Address Groups Network Objects; Figure 41 Address Group List; Figure 42 Creating An Address Group - Billion BiGuard S10 Administration Manual

IP Address Start / When IP Address Range is selected from the drop-down menu, these two
End fields are displayed.
•
•
Click Apply to confirm the settings.

Creating Address Groups Network Objects

Click Address Groups to display the Address Group dialog screen:
FIGURE 41 A
DDRESS
Click Create to create a new Address Group:
FIGURE 42 C
REATING AN
Address Group Type the name that you want this address group Network Object to have.
Name
Available Displays the list of IP addresses which you can add to this group. Select
Addresses the addresses you want to add and click Add.
Selected Displays the list of IP addresses in this group. To delete addresses from
Addresses this list, select the addresses and click Delete.
Click Apply to confirm the settings.
IP Address Start: type the beginning IP address or click Candi-
dates to select the starting range from one of the active PCs that
are listed on the LAN.
IP Address End: type the ending IP address.
G
ROUP LIST
A G
DDRESS ROUP
Configuring the BiGuard S10 45