Figure 35 Wan Settings Static Ip Screen - Billion BiGuard S10 Administration Manual

Static IP protocol. Select this item if your DSL provides you with a static IP address.
FIGURE 35 WAN S
Protocol Displays the current protocol. Click the drop-down arrow to change the
protocol.
Mode There are two modes for the connection: NAT (Network Address Transla-
tion) and Router.
NAT converts private IP addresses (such as in the 192.168.0.0 range) of
the machine on the internal private network to one or more public IP
addresses for the Internet. Select NAT to add an extra layer of security
when user on the internal network need to access the Internet. Select
Router for an internal network.
IP Address Type the IP address that your ISP provided.
Subnet Mask Type the Subnet Mask that your ISP provided.
Gateway Type the Gateway address that your ISP provided.
MAC Address Select Specify a MAC Address (MAC Clone) if your ISP requires a defined
MAC address to access their service or to allow the BiGuard S10 to
accommodate the MAC filter from the ISP. Otherwise, click Default MAC
Address.
DNS Type the Primary/Secondary DNS address that your ISP provided.
RIP Select the RIP version from the drop-down menu. If you are not sure which
version to choose, select Disable.
S IP
ETTINGS TATIC SCREEN
Configuring the BiGuard S10 41