Configuring Ethernet Mac Filtering; Figure 62 Ethernet Mac Filtering Profiles; Figure 63 Adding An Ethernet Mac Filter - Billion BiGuard S10 Administration Manual

56 Administration Guide
DSCP Marking
Service
From Address
To Address
Schedule
Bandwidth
Click Apply to confirm the settings.

Configuring Ethernet MAC Filtering

Click Ethernet MAC Filtering to view the Ethernet MAC Filtering profile screen.
FIGURE 62
Ethernet MAC filtering enables you to prevent Ethernet MAC addresses from being accessed.
Click Create to add a new Ethernet MAC filter.
FIGURE 63
DSCP Marking, also known as DiffServ enables you to classify traffic
based on IP DSCP values. These values can be used to identify traffic
within the network. Other interfaces can match traffic based on the DSCP
markings. DSCP markings are used to decide how packets should be
treated, and is a useful tool to give precedence to varying types of data in
QoS scenarios.
Select an option from the drop-down menu.
The options include Disabled, and various levels of QoS from Bronze to
Premium.
Select the service you want to assign to this QoS.
Select the origin IP address.
Select the destination IP address.
Select the schedule for this QoS item to be active from the drop-down
menu.
Select a bandwidth Network Object from the Bandwidth drop-down menu.
If you have not created bandwidth Network Objects, click Bandwidth to
open the Bandwidth Control screen and define bandwidth parameters.
(See Managing Bandwidth Network Objects
E MAC F
THERNET ILTERING PROFILES
A E MAC
DDING AN THERNET
on page 49.)
FILTER