Figure 32 Dhcp Status Screen - Billion BiGuard S10 Administration Manual

C DHCP
ONFIGURING SERVER SETTINGS
The BiGuard S10 is enabled to act as a DHCP server for your network. Disable this function if
the stations that connect to the BiGuard S10 LAN ports use static IP addresses.
FIGURE 32 DHCP
DHCP Server Choose Disable if IP addresses are assigned manually to stations on your
Mode network.
Choose DHCP Server to have the BiGuard S10 assign IP addresses auto-
matically to stations on your network.
Choose DHCP Relay Agent if you want to place DHCP servers and cli-
ents on different networks, making DHCP management easier when there
is more than one subnet on the network.
The DHCP Server Status and Subnet Definitions screen displays current settings. These
items are display only. To change these settings, click Next.
STATUS SCREEN
Configuring the BiGuard S10 37