LUNA2000-200KWH-2H1 Smart String ESS
Maintenance Manual
Insulated shoes
Medical kit
2.2 Powering Off a Single ESS
2.2.1 Sending a Shutdown Command on the SmartLogger
Step 1 Log in to the SmartLogger WebUI, choose Overview >
a batch shutdown command to the ESSs connected to the same DC bus.
Figure 2-1 Batch shutdown of the ESSs connected to the same DC bus
Step 2 Click Monitoring and check that the indicators for the PCS, ESC, and ESR are
yellow or gray.
----End
Issue 02 (2023-02-28)
Reflective vest
-
Copyright © Huawei Digital Power Technologies Co., Ltd.
2 Routine Maintenance
Safety helmet
-
, and click
Safety harness
-
to send
22