Logging On With Forced, Delayed Logoff At A Remote Phone - Unify OpenStage 60 SIP User Manual

180
Mobile logon
Mobility ID
Enter password
Logging on with forced, delayed logoff at a remote
phone
If the remote phone is busy and your administrator enabled "Forced logoff during
call" with a set timeout, forced logoff does not occur until this timeout expires.
Logon via a key
If a program key is configured for Mobility.
S
Press the "Mobility" program key.
Logon via the context menu
or
Select and confirm the option shown in the idle display context menu
Page 31.

You are prompted to enter your mobility ID. 
j
Enter and confirm mobility ID – usually a phone number.
You are prompted to enter the password.
j
Enter and confirm the user password.
The following mobility messages appear in the display:
• Validating
• Logging off elsewhere
At the same time, the graphic display on the busy remote phone shows
"Forced logoff..." . After the set timeout, the active call is ended and remote
logoff is performed.
• Registering
• Downloading user data
Once logon is complete, the "Mobility" program key LED lights up and the mo-
bility icon appears in the graphic display
Mobility function
.