Error Handling; Example 1: Item Is Unknown At Phone - Unify OpenStage Developer's Manual

Nur für den internen Gebrauch
3.8

Error Handling

In case the provisioning service should send erroneous write actions, the phone will answer
with appropriate error messages.
In this section, the error-handling by the phone is illustrated by three interaction examples.
Please note that the sequences of messages shown here start with the phone sending a mes-
sage to the provisioning service with ReasonForContact set to solicited. The contact-me
message from the provisioning server is omitted for brevity.
3.8.1

Example 1: Item is Unknown at Phone

1. The phone initiates a connection to the provisioning service.
<WorkpointMessage xsi:schemaLocation="http://www.siemens.com/DLS"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns="http://www.siemens.com/DLS">
<Message nonce="104EBC8C863E0C5CA384D4D924C4B220"
maxItems="-1">
<ReasonForContact>solicited</ReasonForContact>
<ItemList>
<Item name="device-type">OpenStage 80</Item>
<Item name="related-device-type">OpenStage 80</Item>
<Item status="failed" name="gigabit-ethernet"></Item>
<Item name="software-type">Siemens SIP</Item>
<Item name="related-software-type">Siemens SIP</Item>
<Item name="software-version">V1 R5.6.53</Item>
<Item name="related-software-version">V1 R5.6.53</Item>
<Item name="contact-me-uri">
http://192.168.233.195:8085/contact_dls.html/ContactDLS</Item>
<Item name="mac-addr">00:01:E3:25:E1:CB</Item>
<Item name="configuration-changed-flag">false</Item>
<Item name="part-number">Unknown</Item>
<Item name="sip-mobility-state">1</Item>
<Item name="e164">5419431261</Item>
<Item name="user-pwd">111111</Item>
<Item status="failed" name="user-pwd-unicode"></Item>
<Item name="basic-e164">5419431261</Item>
<Item name="mobility-enabled">true</Item>
</ItemList>
</Message>
</WorkpointMessage>
A31003-S2000-R102-16-7620, 02/2016
Provisioning Service, Developer's Guide
Basic Communication Procedures
c03.fm
Error Handling
77