Settings For Multi-Line Phones (Keyset); Displaying The Line In The "Overview" Tab - Unify OpenStage 60 SIP User Manual

148
User
if nec.
Configuration
Keyset
Lines
Primary Line 1
Allow in overview
Yes
Save & exit

Settings for multi-line phones (keyset)

The details for each keyset line contain supplementary information for the user.
The following uneditable fields are displayed:
• Address
– Displays the phone number for the line
• Ring on/off
– Shows whether the ringer is activated for this line
• Selection sequence
– Displays the priority of each line seizure when the handset is lifted or the
loudspeaker key for this line is pressed

Displaying the line in the "Overview" tab

Specify here if the selected line should be displayed in the "Overview" tab.
z
You can also configure this setting via the WBM interface
v
Press the key shown until the "Settings" tab is active.
Confirm the option shown.
j
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select the required line (e.g. primary line).
Select and confirm the option shown.
Select and confirm the option shown in the context menu.
Select and confirm the option shown.
Making calls with multiple lines
Page 265.
