Call Forwarding; Standard Call Forwarding - Unify OpenStage 60 SIP User Manual

Call forwarding

Call forwarding
Depending on the settings made by administrator, standard call forwarding may
be configured for the phone or alternatively a call forwarding by type option that
is supported by OpenScape Voice

Standard call forwarding

You can forward calls for your phone to another phone. You can also change,
activate and deactivate call forwarding during a call. The function Forwarding
must be authorised by administrator.
On multi-line telephones (
warding for the primary line.
Three forwarding conditions can be programmed in the forwarding menu:
• Unconditional
• Busy
• No reply (after {1}s)
Because of its direct impact, "Unconditional" call forwarding has the highest pri-
ority followed by "No reply" and "Busy".
If active, "Unconditional" call forwarding is indicated on the graphic display when
the phone is idle.
Forwarded calls can be logged in a call list
The menu Forwarding offers you three types of call forwarding:
Unconditional g

Destination phone number
Busy g

Destination phone number
No reply (after {1}s) g

Destination phone number
A phone number may already be assigned to each call forwarding type. For ex-
ample, one Destination could be Destination 12345.
Alternatively, call forwarding can be programmed on one or more keys
with a fixed destination and a predefined forwarding or call type
Page 95.

Page 83.

Page 14), you can only configure call for-

Page 43.

77