Controlling Call Recording - Unify OpenStage 60 SIP User Manual

Call recording
]
]
[
The station answers. You hear a beep, the recording symbol
display and the recording button LED remains lighting. The call is now being re-
corded (see also
You can pause the recording at any time and continue it again.
n
or
If you end the call, the AutoStart process is set up again for the next call.

Controlling call recording

Starting call recording manually during a call
Prerequisite: Manual mode or AutoStart is selected. You are conducting a call.
Recording has not started. The recording button LED is not lighting.
[
You are conducting a call (see also
S
Press the recording button to start the recording - the LED key lights up.
You hear a beep and the recording symbol
is now being recorded (see also
Pausing call recording manually during a call
Prerequisite: Manual mode or AutoStart is selected. You are conducting a call.
Recording has started. The recording button LED lights up.
[
You are conducting a call (see also
R
Press the recording button to pause the recording - the LED extinguishes and
the recording symbol
You can start the recording again at any time, for example to continue recording
the current call.
Ending call recording automatically
Prerequisite: You are conducting a call. Recording has started. The recording
button LED lights up.
n
or
The recording is ended automatically as soon as the call is terminated or if the
call status changes so that the call is no longer being recorded - for example if
a line is placed on manual hold and another line is seized (Multiline).
The LED extinguishes and the recording symbol
Page 257)

Page 257).

Page 257)

Page 257).

|
on the display disappears.
|
is shown on the
|
is shown on the display. The call
|
on the display disappears.
259