Configuring The "Overview" Tab Display - Unify OpenStage 60 SIP User Manual

152
User
if nec.
Configuration
Keyset
Overview
Primary Line 1
Use FPK order
Add all lines
Save & exit

Configuring the "Overview" tab display

Specify here the sequence in which the individual lines in the "Overview" tab
should appear on the display.
z
You can also configure this setting via the WBM interface
v
Press the key shown until the "Settings" tab is active.
Confirm the option shown.
j
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
All lines that are displayed in the overview (
Select and confirm the required line (e.g. primary line).
Select one of the following options from the context menu to move an individual
line:
• Move up
• Move down
• Move to top
• Move to bottom
or
Select and confirm the option shown to arrange the lines in the same sequence
as the line keys
or
Select and confirm the option shown to display all line keys in the overview.
The setting made for "Allow in overview" (
Select and confirm the option shown.
Making calls with multiple lines
Page 265.

Page 148) are listed.

Page 148) is ignored here.
