Unify OpenStage 60 SIP User Manual page 106

106
User
if nec.
Configuration
Connected calls
Hold and hang-up
Yes
No
Save & Exit
Activating/deactivating Hold and hang-up
This function works in the following call scenarios:
• You have placed a call on hold and hang up.
• You are conducting a consultation call and the second call partner hangs up.
• You accepted a second call, and you or the second participant hang up.
You can use "hold and hang up" to determine whether you will be prompted im-
mediately of after a defined time to retrieve the held call.
This function cannot be used on multi-line phones.
z
You can also configure this setting via the WBM interface
v
Press the key shown until "Settings" is active.
Confirm the option shown.
j
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
In the context menu select and confirm the option shown to activate the function
or
Select and confirm the option shown to deactivate the function again. The func-
tion is always deactivated by default.
Select and confirm the option shown.
Enhanced phone functions
Page 265.
