Making Calls With Multiple Lines; Incoming Calls; Accepting Calls For The Primary Line; Accepting Calls For Secondary Lines - Unify OpenStage 60 SIP User Manual

Making calls with multiple lines

Making calls with multiple lines
You can use your OpenStage 60/80 as a multi-line phone. If you have any ques-
tions regarding how to configure your OpenStage phone as a multi-line phone,
please contact your administrator.
The following is a description of the telephony scenarios for multi-line phones.
To facilitate comprehension, you should familiarise yourself with the enhanced
telephony application and how to use the line keys beforehand. Furthermore,
you can specify individual settings for your multi-line telephone. Refer to the fol-
lowing sections for a detailed description of the individual components:
• Introduction to multi-line phones
• Lines and line keys
• Multi-line telephony interface
• Individual settings

Incoming calls

Depending on your individual settings, you will be notified of incoming calls.

Accepting calls for the primary line

In this case, the telephone behaves in the same way as a single-line telephone.
See Page 51 and

Answering a call via a Bluetooth headset
T
Press the flashing key for the main line
or
J
Press the answer key on the headset to answer the call.

Accepting calls for secondary lines

Prerequisite: The secondary line is configured on your multi-line telephone.
Using the handset
^
Lift the handset.
[
Conduct call.
The line that rings is automatically selected. If calls are ringing on more
than one line, you will be connected to the line that has been ringing the
longest.
Page 14

Page 24

Page 38

Page 148

Page 99.

125