Switching To Speakerphone Mode; Switching To The Handset - Unify OpenStage 60 SIP User Manual

56
n

Switching to speakerphone mode

Make note of the two different processes and activate, if necessary, your
preferred setting
Prerequisite: You are conducting a call via the handset and the microphone and
loudspeaker functions have been activated by administrator.
Standard mode
]
and Hold down the key and replace the handset. Then release the key and proceed
with your call.
US mode
If the country setting is set to US, you do not have to hold down the loudspeaker
key when replacing the handset to switch to speakerphone mode.
n
Press the key shown.
]
Replace the handset. Proceed with your call.
{ }
or
A secure voice communication is indicated by a closed padlock icon on the
graphic display; a nonsecure voice communication is indicated by an open
padlock icon on the graphic display (see also

Switching to the handset

Prerequisite: You are conducting a call in speakerphone mode.
^
Lift the handset.
n
The key shown goes out.
Page 221.

Basic functions
Page 51).
