Incoming Calls; Answering A Call Via The Handset; Answering A Call Via The Loudspeaker (Speakerphone Mode) - Unify OpenStage 60 SIP User Manual

52
if nec.
Accept
if nec.

Incoming calls

Your OpenStage phone rings with the tone signal set when an incoming call is
received. The call is also visually signalled on the alert bar.
If transmitted, calling party information (name, phone number) appears on the
graphic display.
If you have set a pattern melody
your phone, it is possible that administrator preset a different ringtone or
deactivates the ringtone, regardless of the call type (e.g. an external or in-
ternal call).
An incoming call will interrupt any ongoing telephone setting operations.
As soon as the call ends, press
ture where you were interrupted.

Answering a call via the handset

The phone rings. The caller is displayed.
If the phone number is stored in the local telephone, the associated name
is shown on the display (must be activated by administrator).
^
Lift the handset.
X
Set the call volume.
Answering a call via the loudspeaker
(speakerphone mode)
The phone rings. The caller is displayed.
The pop-up menu opens:
Select and confirm the option shown. The n key lights up.
or
n
Press the key shown. The key lights up. The speakerphone function is activated.
X
Set the call volume.
Page 221 or a ringtone

v
to return to the point in the menu struc-
Basic functions
Page 219 on
