234
User
if nec.
Configuration
Bluetooth
Configuration
Phone name
Save & Exit
Bluetooth name for your OpenStage
Here you can determine which name your OpenStage should use to register at
other Bluetooth devices.
z
You can also configure this setting via the WBM interface
By factory default, the Bluetooth name is: OpenStage [MAC address of
your telephone].
v
Press the key shown until the "Settings" tab is active.
Confirm the option shown.
j
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown. The Bluetooth settings dialog is selected.
Select and confirm the option shown.
j
Specify and confirm the required name.
Select and confirm the option shown.
Individual phone configuration
Page 265.