Multiline; Recording Calls; Automatic Call Recording; Manual Call Recording - Unify OpenStage 60 SIP User Manual

258
Recording on
Recording off

Multiline

In terms of call recording, no distinction is made between multiline and single-
line. If recording has started, recording is performed, otherwise not. The record-
ing status of a line persists as long as calls are connected to this line.
For example, if line A is being recorded (initiated manually) and you switch to
line B or line A is placed on manual hold and you switch to line B, the recording
is ended and a partial recording saved.
If you disable recording for the call on line B (mode = manual or auto start) and
switch back to line A, the recording for line A is not started again.
The modes mentioned (All Calls, AutoStart or Manual) refer to the telephone and
are therefore the same for all lines.

Recording calls

Automatic call recording

This is the simplest mode. If you have accepted a call or called a subscriber and
the subscriber answers, the call is recorded automatically. Refer to
to check which calls this can be.
As soon as the recording starts, you will see the recording symbol
a beep (see also
You cannot pause the recording manually in this mode.

Manual call recording

Activating or deactivating call recording when the telephone is in
idle mode
Prerequisite: Manual mode is selected. The recording button is configured and
indicates the status.
Select the option shown in the telephone's context menu to enable the option.
or disable the option.
or
S
Press the recording button to enable the option - the LED key lights up.
R
or press the key shown to disable the option - the LED extinguishes.
The recording button also indicates the status change if you activated or deacti-
vated call recording via the context menu.

Call recording with AutoStart

Standby mode is activated in principle in idle mode. The recording button LED
lights up. You cannot switch off the recorder. As soon as a call is set up, call re-
cording starts automatically.
^
Lift the handset.
or
n
Press the key shown.
Page 257).

Call recording
Page 257

|
and hear