Deactivating The Ringer Temporarily For Incoming Calls And Reactivating It; Do Not Disturb; Enabling Do Not Disturb Via A Key - Unify OpenStage 60 SIP User Manual

Privacy/security
Deactivating the ringer temporarily for incoming calls
and reactivating it
If you are disturbed on an important call by the phone ringing, for example, you
can deactivate the ringer temporarily and then activate it again.
)
Press the key briefly. The ringer is deactivated.
)
Now press the key again briefly. The ringer is reactivated.

Do not disturb

If "Do not disturb" is activated, your telephone will not ring. The caller hears the
busy tone or an announcement that the called party cannot accept any calls at
the moment.
The "Do not disturb" feature can be enabled or disabled by means of a specially
programmed sensor key or also from the idle menu.
On multi-line telephones (
disturb" function for your primary line.

Enabling do not disturb via a key

Prerequisite: A programmable sensor key must be assigned the function
"DND" (Do Not Disturb) (
Page 170.

S
Press the "Do not disturb" programmable sensor key.
R
To deactivate the "Do not disturb" function, press the lit programmable sensor
key again.
Page 14) you can only activate the "Do not

Page 92). "Do not disturb" must be allowed

169