Programming Sensor Keys; Starting Programming - Unify OpenStage 60 SIP User Manual

Programmable sensor keys
OK
User
Phone
Program keys

Programming sensor keys

Starting programming

Directly via a sensor key
S
Hold down the sensor key to which a function should be assigned until the pro-
gramming prompt is displayed.
If the prompt is not displayed or a programmed function is not executed,
then you can only launch key programming via the user menu (ask your
administrator about the current setting).
Confirm to begin programming. The sensor key illuminates continuously.
Via the user menu
or
You can also program keys via the user menu.
v
Press the key shown until the "Settings" tab is active.
Confirm the option shown.
j
if nec. Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown. You are prompted to press the key you
wish to program.
S
Press the sensor key you want to program with a function. The sensor key illu-
minates continuously.
93