During Calls; Making And Receiving Calls On A Single Line; Making And Receiving Calls With Multiple Lines - Unify OpenStage 60 SIP User Manual

128

During calls

Making and receiving calls on a single line

If you only use one line on your multi-line telephone to make calls, and you re-
ceive calls on the same line, the phone operates in the same way as a single-
line telephone:
• Redial Page 68

• Consultation
• Toggle/Connect
• Callback

• Hold Page 102

• Call waiting (second call)
• Transferring a call
• Conference
Functions available exclusively for the primary line:
• Call lists Page 43

• Voicemail

• Call forwarding
• Do not disturb
Depending on your individual settings, you will be notified of incoming calls
Page 154.


Making and receiving calls with multiple lines

Accepting a waiting call
Depending on the settings for "Rollover", you will be notified of incoming
calls Page 154.

Prerequisite: You are conducting a call. At the same time, a call is incoming on
another line.
[
Call on line 1.
T
Press the line key for line 2. The call on line 1 is placed on hold.
All multi-line users that share the line on which the call is being held
( Page 24) can now pick up the held call. To prevent other users from

answering the held call, you must place the call on "Consultation" hold
Page 70.

Depending on the setting made by your administrator, you may have to
press the trunk key twice to accept the call on the other line. The first call
is either placed on hold or released depending on the setting.
[
Conduct call on line 2.
\
End call on line 2.
T
Press line key for line 1.
[
Retrieve call on line 1.
Page 70

Page 72

Page 74
Page 108

Page 111

Page 120

Page 46
Page 77

Page 169

Making calls with multiple lines