Key Click - Unify OpenStage 60 SIP User Manual

226
User
if nec.
Phone

Key click

Lautstärke
Medium
Keys
Keypad only
All keys
Save & Exit
Key click
You can configure whether a key click should be audible when a key is pressed.
You can also decide whether this should apply for all keys or only for the keys
on the keypad. In addition, you can adjust the click volume or disable the sound.
z
You can also configure this setting via the WBM interface
v
Press the key shown until the "Settings" tab is active.
Select and confirm the option shown.
j
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Adjusting the volume for the Key click
Select and confirm the option shown.
For instance, select and confirm a medium volume level. You can also select one
of the following three options:
• Low
• High
• Off (for no click)
Key selection
Select and confirm the option shown.
Select and confirm if the setting is only to apply for the character input keys.
or
Select and confirm the option shown for all keys.
Select and confirm the option shown.
Individual phone configuration
Page 265.
