Setting Headset Port Use - Unify OpenStage 60 SIP User Manual

222
if nec.
Audio
Settings
Open listening
Standard mode
Save & Exit
User
if nec.
Audio
Settings
Headset port
Wired headset
Save & Exit
j
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select the option shown.
Select and confirm the setting you want
or "US mode").
Select and confirm the option shown.

Setting headset port use

Here you set whether you are using a wired or cordless DECT headset.
z
You can also configure this setting via the WBM interface
v
Press the key shown until the "Settings" tab is active.
Confirm the option shown.
j
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select the option shown.
From the following setting
menu.
• Wired headset
• Wireless headset
• Conference phone
Select and confirm the option shown.
1. The phone displays the current setting.
2. The phone displays the current setting.
Individual phone configuration
1
in the context menu ("standard mode"
2
select and confirm the option shown in the context
Page 265.
