Unify OpenStage 60 SIP User Manual page 100

100
User
if nec.
Configuration
Incoming calls
Deflect
Allow deflection
Yes
Default destination
Deflect to DSS Yes
Permitting call deflection
z
You can also configure this setting via the WBM interface
v
Press the key shown until the "Settings" tab is active.
Confirm the option shown. 
j
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown in the context menu.
Select and confirm the option shown.
j
Enter and confirm the phone number to which the station should be deflected.
Entering a destination phone number is not mandatory when call deflec-
tion is active. If you want to deflect a call, you are prompted to enter a des-
tination phone number if there is none stored.
Deflecting to a DSS number
or
A call can be deflected to a direct station selection (DSS) subscriber using the
DSS key, if the key is configured and the deflect function is activated by your ad-
ministrator Page 134.

Information only, as set by administrator: Yes or No.
Enhanced phone functions
Page 265.
