Redial - Unify OpenStage 60 SIP User Manual

68
Niels, Bohr 18.10. 07:06am

Redial {1}

Redial {1}
Redial
You must have activated the call journal in order to use the call list. This
also applies for redialling the last number dialled
journal is not activated, the message "Call Log is disabled" is shown on the
display when you press the w key. If you try to perform a last number redial
using a programmed function key, the message "Key function unavailable"
is shown on the display in this case.
If you still want to access the function for redialling the last number dialled
despite having disabled the call journal, you can alternatively use the
OpenScape Voice "last caller redial" function, assuming this function has
been activated by the administrator
Redialling from the call list
Only calls to the primary line are received on multi-line phones
( Page 14).

w
Press the key repeatedly until the application's "Dialled" tab appears.
Select and confirm the entry you want. The phone number associated with the
list entry is dialled.
Redialling from the pop-up menu
^
Lift the handset.
or
n
Press the key shown.
Select and confirm the option shown.
The last phone number entered is dialled.
Redialling from the idle menu
Select and confirm the option shown in the idle display (
menu. The last phone number entered is dialled.
Basic functions
Page 166. If the call

Page 200.

Page 31) context
