Pitch/Phase Mod - Korg Pa50 User Manual

015: Analog Rec
(Stereo Analog Record)
This effect simulates the noise caused by scratches and dust
on analog records. It also reproduces some of the modulation
caused by a warped turntable.
Stereo In - Stereo Out
Left
EQ Trim Pre EQ
EQ Trim Pre EQ
Right
Speed [RPM]
a
Sets the r.p.m. of a record
Flutter
b
Sets the modulation depth
Noise Density
Sets the noise density
c
Noise Tone
Sets the noise tone
Noise Level
Sets the noise level
Src
d
Selects the modulation source for the noise level
Amt
Sets the modulation amount of the noise level
Click Level
Sets the click noise level
Src
e
Selects the modulation source for the click noise level
Amt
Sets the modulation amount of the click noise level
EQ Trim
f
Table , "Sets the EQ input level," on page 176
Pre EQ Cutoff [Hz]
Sets the EQ center frequency
Q
g
Sets the EQ band width
Gain [dB]
Sets the EQ gain
Wet/Dry
Table , "Sets the balance between the effect and dry sounds," on page 175
Src
h
Table , "Selects the modulation source of the effect balance," on page 175
Amt
Table , "Sets the modulation amount of the effect bal-
ance," on page 175
b: Flutter
This parameter enables you to set the depth of the modu-
lation caused by a warped turntable.
e: Click Level
This parameter enables you to set the level of the click
noise that occurs once every rotation of the turntable.
This simulation reproduces record noise, and the noise
generated after the music on a vinyl record finishes.
Wet / Dry
Analog Record
Simulation
Wet / Dry
33 1/3, 45, 78
0...100
0...100
0...100
0...100
Off...Tempo
–100...+100
0...100
,
Off...Tempo
–100...+100
0...100
300...10.00kHz
0.5...10.0
–18.0...+18.0dB
Dry, 1:99...99:1, Wet
Off...Tempo
–100...+100

PITCH/PHASE MOD.

Pitch/phase modulation effects
016: Chorus
(Stereo Chorus)
This effect adds thickness and warmth to the sound by mod-
ulating the delay time of the input signal. You can add spread
to the sound by offsetting the phase of the left and right LFOs
from each other.
Stereo In - Stereo Out
Left
LEQ HEQ
EQ Trim
LEQ HEQ
EQ Trim
Right
LFO: Tri / Sine
LFO Waveform
a
Selects LFO Waveform
LFO Phase [degree]
b
Sets the LFO phase difference between the left and right
LFO Frequency [Hz]
Sets the LFO speed
Src
c
Selects the modulation source of LFO speed
Amt
Sets the modulation amount of LFO speed
BPM/MIDI Sync
Switches between using the frequency of the LFO speed and using the
tempo and notes
BPM
Selects MIDI Clock and assigns tempo
d
Base Note
Selects the type of notes that specify the LFO speed
Times
Sets the number of notes that specify the LFO speed
L Pre Delay [msec]
e
Sets the delay time for the left channel
R Pre Delay [msec]
f
Sets the delay time for the right channel
Depth
Sets the depth of LFO modulation
Src
g
Selects the modulation source of the LFO modulation depth
Amt
Sets the modulation amount of the LFO modulation depth
EQ Trim
h
Table , "Sets the EQ input level," on page 176
Pre LEQ Gain [dB]
Table , "Sets the gain of Low EQ," on page 176
i
Pre HEQ Gain [dB]
Table , "Sets the gain of High EQ," on page 176
Wet/Dry
Table , "Sets the balance between the effect and dry sounds," on page 175
Src
j
Table , "Selects the modulation source of the effect balance," on page 175
Amt
Table , "Sets the modulation amount of the effect bal-
ance," on page 175
e: L Pre Delay [msec], f: R Pre Delay [msec]
Setting the left and right delay time individually allows
you to control the stereo image.
Effects 185
Pitch/Phase Mod.
Wet / Dry
Chorus
Chorus
Wet / Dry
LFO Phase
Triangle, Sine
–180...+180
Fx:010
0.02...20.00Hz
Fx:009,
Off...Tempo
–20.00...+20.00Hz
Off, On
Fx:009,
MIDI, 40...240
Fx:009
Fx:009
x1...x16
Fx:009
0.0...50.0msec
0.0...50.0msec
0...100
Off...Tempo
–100...+100
0...100
–15.0...+15.0dB
–15.0...+15.0dB
–Wet...–1:99, Dry, 1:99...Wet
Fx:010,
Off...Tempo
–100...+100