Print Area - Canon ImagePROGRAF iPF680 User Manual

iPF680
Memory
Memory
Interface
USB
Ethernet
Ink
For information on the ink the printer supports, see "Ink Tanks."
Paper
For information on the types of paper the printer supports, refer to the Paper Reference Guide. (See "Displaying the
Paper Reference Guide.")
Paper width
Minimum paper length
Maximum printable length ( *1 )
Thickness
Roll maximum outer diameter
Supported paper core inner diameter

Print area

*1: Varies depending on the operating system or application.
Roll Holder Set
Stand
Stand( *1 )
*1: The stand that is included depends on the region where you purchased the printer.
Print Area
Print Area
A margin required by the printer is added with respect to the size of paper loaded in the printer. Except in borderless
printing, the actual printing area corresponds to the paper size minus the space for this margin.
User's Guide
Format
Mode
Connector
Format
Specification
Protocols
P.363
➔
For information on the paper widths the printer supports, see "Paper Sizes."
Rolls
Sheets
Rolls
Sheets
Rolls
Sheets
For details, see "Print Area."
256 MB
Internal port
Full-speed (12 Mbps), high-speed (480 Mbps), bulk transfer
Series B (4-pin)
Internal port
IEEE 802.3 10Base-T,
IEEE 802.3u 100Base-TX/Auto-Negotiation,
IEEE 802.3ab 1000Base-T/Auto-Negotiation,
IEEE 802.3x Full Duplex
IEEE 802.3az EEE
SNMP (supports Canon-MIB), HTTP, TCP/IP (IPv4/IPv6)
P.540
➔
203.2 mm (8.0 in)
279.4 mm (11.0 in)
18 m (19.7 yd)
1,600 mm (63.0 in)
0.07–0.8 mm (0.0028–0.031 in)
0.07–0.8 mm (0.0028–0.031 in)
150 mm (6 in) or shorter
2 inches / 3 inches
P.631
➔
Roll Holder Set RH2-26
Printer Stand ST-27
Printer Stand ST-27
Print Area
P.360
➔
631