Specifying The Cutting Method For Rolls - Canon imagePROGRAF iPF771 User Manual

iPF770
3
In the Paper Detailed Settings dialog box displayed
next, select the desired settings values in
tween Pages and
Time, and then click OK.
(See "Paper Detailed Settings Dialog Box (Mac
OS).")
P.256
➔

Specifying the Cutting Method for Rolls

Specifying the Cutting Method for Rolls

How rolls are cut after ejection varies depending on printer settings.
Cutting Method
Automatic The roll is automatically cut by the Cutter Unit fol-
lowing printer driver settings.
Choose this setting if you prefer not to have docu-
Eject (wait-
ments dropped immediately after printing, as when
ing for ink
to dry after waiting for ink to dry.
printing) To cut the roll with the Cutter Unit, press the Cut
button.
Choose this setting when using media that cannot
Manual
(when us- be cut using the Cutter Unit.
ing media Cut each page from the roll using scissors. For con-
that cannot tinuous printing (if you will cut each page later), se-
lect Automatic Cutting > Yes or select Print Cut
be cut with
Guideline.
the Cutter
Unit ) (See "Cutting Roll Paper After Printing.")
Paper cut- Choose this option if you want to cut pages by
pressing Cutter Unit buttons for manual cutting after
ting (to
printing when Automatic Cutting > No is selected
have the
roll cut at or Print Cut Guideline is selected in the printer
your speci- driver.
fied posi- Otherwise choose this option if you want to cut the
roll edge after loading a roll.
tion)
•
Automatic and Eject are valid only when you have selected Automatic Cutting > Yes in the printer driver.
•
Note
With Eject, printing does not resume after a series of jobs have been printed continuously until the roll is cut.
•
Eject is the preset selection in Cutting Mode for some types of paper. For this paper, we recommend keeping the
preset cutting mode.
Cut rolls manually in the following cases:
User's Guide
C
Be-
D B
Between Scans in Drying
P.135
➔
Specifying the Cutting Method for Rolls
Printer Setting
Media Automatic Automatic
Menu > Cutting
Paper De-
Eject
tails >
(Various
Types of
Paper) >
Cutting
Manual
Mode
Cut button Yes
pressed
Driver Setting
Yes
Yes
No, Yes, Print
Cut Guideline
No, Print Cut
Guideline
333