Serial Port Selection Menu - IBM pSeries 690 User Manual

Serial Port Selection Menu

This menu allows you to enable or disable the call-in and call-out functions of each serial port in any
combination.
Note: If the system is running in partition mode, call-out is disabled.
Serial Port Selection Menu
1. Serial Port 1 Call-Out:
Currently Disabled
NOT supported in LPAR mode.
2. Serial Port 2 Call-Out:
Currently Disabled
NOT supported in LPAR mode.
3. Serial Port 1 Call-In:
Currently Disabled
4. Serial Port 2 Call-In:
Currently Disabled
98. Return to Previous Menu
0>
Call-in and ring indicate power-on cannot be enabled at the same time. If ring-indicate power-on is already
enabled and you try to enable call-in, a message prompts you for confirmation. Refer to the message
displayed on the screen.
Chapter 4. Using the Service Processor
51