Serial Port Selection Menu; Serial Port Speed Setup Menu - IBM S85 pSeries 680 Service Manual

Serial Port Selection Menu

You can enable and/or disable the call-in and call-out functions of each serial port in
any combination from this menu:
1. Serial Port 1 Call-Out:
2. Serial Port 2 Call-Out:
3. Serial Port 1 Call-In:
4. Serial Port 2 Call-In:
98. Return to Previous Menu
1>
Note: For security, if the service processor detects an operator panel battery failure,

Serial Port Speed Setup Menu

Serial port speed can be set for terminal performance or to accommodate modem
capabilities using this menu:
1. Serial Port 1 Speed:
2. Serial Port 2 Speed:
98. Return to Previous Menu
1>
A serial port speed of 9600 baud or higher is recommended. Valid serial port speeds
are as follows:
50
75
110
134
150
300
462
Service Guide
Serial Port Selection Menu
Currently Disabled
Currently Disabled
Currently Disabled
Currently Disabled
the serial port dial-in capability is disabled. See "Service Processor Call-In
Security" on page 471 for more information.
Serial Port Speed Setup Menu
Currently 9600
Currently 9600
600
1200
1800
2000
2400
3600
4800
7200
9600
19200
38000
57600
115200