Figure 11-4 D-Brick2 Operators Panel And Power Supply/Cooling Modules - Silicon Graphics SGI Altix 3700 Bx2 User Manual

11: D-brick2 Storage Module
Power-on LED
Invalid address ID LED
Enclosure ID switch
Alarm mute switch
PSU/cooling/temperature fault LED
System/ESI fault LED
Hub mode LED
2 Gb/s link speed LED
Configuration switches
On
Operator's Panel
126
ID
1
2
3
4
5
6
7
Off
8
9
10
11
12
Figure 11-4 D-brick2 Operators Panel and Power Supply/Cooling Modules
The operators panel ("ops panel") contains an enclosure services processor that monitors
and controls D-brick2 functions. The ops panel contains LEDs 9 show the status of all
modules, an audible alarm that indicates a fault state is present, a push-button alarm
mute switch, and a thumbwheel enclosure ID address range selector switch. When the
D-brick2 is powered on, the audible alarm sounds for one second, and the power-on LED
illuminates.
Figure 11-4 identifies all controls and indicators on the ops panel. Note that the
operator's panel configuration switches slide left for "on" and right for "off." For
detailed descriptions of the LEDs and configuration switch information, see Chapter 5 in
the SGI Total Performance 9100 (2Gb TP9100) Storage System User's Guide (P/N
007-4522-00x).
Fan fail LED AC input fail LED
DC output fail LED PSU good LED
AC power input
Power on/off
switch (I = on)
007-4377-002