Software Upgrade; Figure 8-71: Versions Screen - AudioCodes Mediant 2000 User Manual

The screen also displays any loaded files in the device.
To display the Device Information screen, take these 2 steps:
1. From the main menu list on the left, click on the Status and Diagnostics link.
The Status and Diagnostics screen appears.
2. From the sub-menu bar on the top, click the Device Information link. The Device
Information screen appears.
To delete any loaded files, take these 5 steps:
1. From the main menu list on the left, click on the Status and Diagnostics link.
The Status and Diagnostics screen appears.
2. From the sub-menu bar on the top, click the Device Information link. The Device
Information screen appears.
3. In the Device Information table, click the Delete button. The file deletion takes
effect only after a device reset is performed.
4. In main menu to the left, click the Reset link. The Reset screen appears.
5. Select the Burn option and click the Reset button to restart the device with the
new settings. (Refer to ''Reset Button'' on page 266.)
8.2.10

Software Upgrade

Note:
If you upgraded your cmp and the "SW version mismatch" message appears
in the Syslog or WEB, you know that your license key does not support the
new cmp version.
User's Manual

Figure 8-71: Versions Screen

254
Mediant 2000
Document # LTRT-69805