Table 23-4: Multiple Ip Parameters - AudioCodes Mediant 2000 User Manual
Mgcp, megaco, tpncp voip mediant media gateways
Hide thumbs
Also See for Mediant 2000:
- User manual (702 pages) ,
- Installation manual (44 pages) ,
- Hardware installation manual (30 pages)
Table of Contents
Advertisement
Parameter Name
EnableMultipleIPs
LocalMediaIPAddress
LocalMediaSubnetMask
LocalMediaDefaultGW
LocalControlIPAddress
LocalControlSubnetMask
LocalControlDefaultGW
LocalOAMIPAddress
LocalOAMSubnetMask
LocalOAMDefaultGW
The following table lists the VLAN parameters.
Parameter Name
VLANMode
VLANNativeVLANId
VLANOamVLANId
VLANControlVLANId
VLANMediaVLANId
VLANSendNonTaggedOnNative
User's Manual
Table 23-4: Multiple IP Parameters
Default Value
0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Table 23-5: VLAN Parameters
Default Value
0
1
1
2
3
0
524
Comments
When burned in the flash, the board will try
to initialize multiple IPs feature in
subsequent boots.
The source address of the board in the
Media network
The subnet applied to the board in the
Media network
The default gateway in the Media network
The source address of the board in the
Control network
The subnet applied to the board in the
Control network
The default gateway in the Control network
(currently not in use)
The source address of the board in the
OAM network
The subnet applied to the board in the
OAM network
The default gateway in the OAM network
(currently not in use)
Comments
When burned in the flash, the board will try
to initialize VLANs feature in subsequent
boots.
The PVID of the switch port which the
board connected to.
The VLAN Identifier of the OAM.
The VLAN Identifier of the Control.
The VLAN Identifier of the Media.
Specifies whether to send non-tagged
Document # LTRT-69805
Mediant 2000
Advertisement
Table of Contents
