AudioCodes Mediant 2000 User Manual page 364

ini File Parameter Name
WEBAccessList
WebAuthMode
WebLogoText
WEBRADIUSLogin
User's Manual
Table 11-10: Web Interface Parameters
Description
logo image.
Allows IP addresses to
connect to the Web interface.
Set to zeroes to allow all IP
addresses.
Range: Valid IP address
Selects HTTP basic (clear
text) or digest (MD5)
authentication for the web
interface.
When set to 0, basic
authentication (clear text) will
be used.
When set to 1, digest
authentication (MD5) will be
used.
When set to 2, digest
authentication (MD5) will be
used for HTTP, while basic
authentication will be used
for HTTPS.
Note that turning on RADIUS
login forces basic
authentication.
Replaces the default
AudioCodes logo image,
appearing in the upper left
hand corner of the device
web interface pages, with a
text string.
Range = String[15]
Note: This string will also
replace the AudioCodes
name in the title bar.
Uses the RADIUS (Remote
Authentication Dial-In User
Server/Service) for Web
interface authentication.
Make sure that
ENABLERADIUS is on.
Use of this parameter without
HTTPSONLY = 1 is not
recommended.
364
Host/Manual
Default Value Valid Range
0.0.0.0 See Descr.
0 0, 1
NULL See Descr.
0 0, 1
Document # LTRT-69805
Mediant 2000