AudioCodes Mediant 2000 User Manual page 301

User's Manual
ini File Parameter Name
FramingMethod
Version 5.0
Table 11-2: PSTN Parameters
Description
RTUP_SUCCESS bit: (bit
#1, bit mask 0x0002)
When set to 1: the Startup
Procedure is considered as a
SUCCESS only when ALL
DLCs succeeded to Reset;
When set to 0: the Startup
Procedure is considered as a
SUCCESS as soon as 1
DLC succeeded to Reset;
Default is 0: (only partial
reset is considered as a
success).
DPNSS_BEHAV_DASS2_P
ROTOCOL bit: (bit #4,
bitmask 0x0010)
When 1: the line runs the
DASS2 protocol instead of
DPNSS.
When 0: the line runs the
DPNSS protocol.
Default is 0 (DPNSS
protocol)
Selects the physical framing
method used for this trunk.
0 = default according to
protocol type E1 or T1
[E1 default = E1 CRC4
MultiFrame Format extended
G.706B (as c)]
[T1 default = T1 Extended
SuperFrame with CRC6 (as
D)]
1 = T1 SuperFrame Format
(as B).
a = E1 DoubleFrame Format
b = E1 CRC4 MultiFrame
Format
c = E1 CRC4 MultiFrame
Format extended G.706B
A = T1 4-Frame multiframe.
B = T1 12-Frame multiframe
(D4).
301
11. Appendix - Individual ini File Parameters
Host/Manual
Default Value
See Descr.
Valid Range
0, 1, a, b, c, A, B,
C, D, F
June 2006