AudioCodes Mediant 2000 User Manual page 339

User's Manual
ini File Parameter Name
_SUERM_SU_D
SS7_MTP2_Param
_SUERM_T
SS7_MTP2_Param
_Timer_T1
SS7_MTP2_Param
_Timer_T2
SS7_MTP2_Param
_Timer_T3
SS7_MTP2_Param
_Timer_T4E
SS7_MTP2_Param
_Timer_T4N
SS7_MTP2_Param
_Timer_T5
SS7_MTP2_Param
_Timer_T6
SS7_MTP2_Param
_Timer_T7
SS7M3BRdcyXlinkTraceA
ll
SS7M3UATraffic
Behavior
SS7MTP3Rdcy
BoardNum
Version 5.0
Table 11-5: SS7 Parameters
Description
threshold.
Defines the SS7 SUERM
(Signal Unit Error Rate
Monitor) T threshold.
Defines the SS7 MTP2 T1
alignment ready timer (in
msecs).
Defines the SS7 MTP2 T2
unaligned timer (in msecs).
Defines the SS7 MTP2 T3
timer aligned.
Defines the SS7 MTP2 T4e
Emergency proving period
timer (msec).
Defines the SS7 MTP2 T4n
Nominal proving period
timer.
Defines the SS7 MTP2
Sending SIB timer.
Defines the SS7 MTP2
Remote Congestion timer
(in msec).
Defines the SS7 MTP2
excessive delay of the ack
timer (in msec).
When set via INI-file,
activates trace output for all
X-links (only when SS7
redundancy is configured).
Defines the M3UA behavior
when the SS7 links are up,
but there is no association
to the soft switch.
0 = NONE (no special
behavior)
1 = DEACTIVATE (busy
links)
2 = SIPO (LPO links)
This parameter is used to
define the board number for
the Signaling System 7
(SS7) MTP3-User
Adaptation Layer
redundancy mode. Each
339
11. Appendix - Individual ini File Parameters
Host/Manual
Default Value
64
50000
150000
2000
500
8200
120
6000
2000
0
0
0
Valid Range
0 to 256
0 to 100000
0 to 200000
0 to 20000
0 to 5000
0 to 15000
0 to 2400
0 to 10000
0 to 5000
June 2006