AudioCodes Mediant 2000 User Manual page 321

User's Manual
ini File Parameter Name
TDMBusEnableFallback
TDMBusFallbackClock
TDMBusLocalReference
Version 5.0
Table 11-3: Infrastructure Parameters
Description
synchronizes.
1 = Local oscillator
3 = MVIP
4 = PSTN Network
8 = H.110A
9 = H.110B
10 = NetRef1
11 = NetRef2
12 = SC2M
13 = SC4M
14 = SC8M
Default = 1; TP-1610 = 3
Defines the auto fallback of
the clock.
Range:
0 = Manual
1 = Auto Non-Revertive
2 = Auto Revertive
Selects the fallback clock
source on which board
synchronizes in the event of
clock failure.
4 = PSTN Network
8 = H.110A
9 = H.110B
10 = NetRef1
11 = NetRef2
When the clock source is set
to Network, this parameter
selects the Trunk ID to be
used as the clock
synchronization source of the
board.
When using H.110/H.100
bus, this parameter also
selects the trunk used as the
clock source for the NetRef
clock generation (in this
case, the clock source must
321
11. Appendix - Individual ini File Parameters
Host/Manual
Default Value
0
4
0
Valid Range
See Descr.
See Descr.
See Descr.
June 2006