User's Manual
Alarm:
Event Type:
Probable Cause:
Alarm Text:
Status Changes:
Condition:
Alarm status:
<text> value:
Condition:
Alarm status:
<text> value:
Condition:
Alarm status:
Corrective Action:
24.1.4
Component: SS7#0
The source varbind text for all the alarms under the component below is
Board#<n>/SS7#0/SS7Link#<m>
number.
Alarm:
OID:
Default Severity
Event Type:
Probable Cause:
Alarm Text:
Status Changes:
Condition:
Version 5.0
Table 24-9: acBoardEthernetLinkAlarm Alarm Trap
acBoardEthernetLinkAlarm
equipmentAlarm
underlyingResourceUnavailable (56)
Ethernet link alarm: <text>
Fault on single interface
Major
Redundant link is down
Fault on both interfaces
critical
No Ethernet link
Both interfaces are operational
cleared
Ensure that both Ethernet cables are plugged into the back of the system.
Inspect the system's Ethernet link lights to determine which interface is
failing. Reconnect the cable or fix the network problem
Table 24-10: acSS7LinkStateChangeAlarm Trap
acSS7LinkStateChangeAlarm
1.3.6.1.4.1.5003.9.10.1.21.2.0.19
Major
communicationsAlarm
other
*** SS7 *** Link %i is %s $s
Operational state of the SS7 link becomes 'BUSY'.
where n is the slot number and m is the link
533
24. Appendix - SNMP Traps
June 2006