Figure 8-32: Rtp Settings Screen (Network Settings); Rtp Settings; Ipmedia Settings - AudioCodes Mediant 2000 User Manual

User's Manual
3. Use the appropriate tables in the Appendix, ''Individual ' on page 291ini 'File
Parameters'' on page
Fax/Modem/CID Settings parameter fields in the Fax/Modem/CID Settings
screen.
4. After configuring/modifying the parameter fields, click the Submit button. The
changes are entered into the system and the screen is refreshed.
8.2.8.7

RTP Settings

To configure the RTP Settings, take these 4 steps:
1. From the main menu list on the left, click on the Advanced Configuration link.
The Advanced Configuration screen appears.
2. From the sub-menu bar on the top, move the cursor on the Media Settings link.
A drop-down menu appears. Click ON the RTP Settings option. The RTP
Settings screen appears.
3. Use the appropriate tables in the Appendix, ''Individual 'ini 'File Parameters'' on
page
fields in the RTP Settings screen.
4. After configuring/modifying the parameter fields, click the Submit button. The
changes are entered into the system and the screen is refreshed.
8.2.8.8

IPmedia Settings

The following mode options are available for the IP settings:
Single IP Network : This mode enables the configuration of the IP network
elements on-line (Clicking the Submit button is needed only).
Version 5.0
291

Figure 8-32: RTP Settings Screen (Network Settings)

291 as a reference when configuring/modifying the RTP Settings parameter
as a reference when configuring/modifying the
217
8. Mediant 2000 Management
June 2006