AudioCodes Mediant 2000 User Manual page 345

User's Manual
ini File Parameter Name
Profile
MGCPDefault
PacketizationPeriod
MGCPDefaultCoder
MGCPDTMFDetection
Point
MGCPRetransmission
Timeout
MGCPRetransmition
Timeout
PMCongestionHysteresis
ProvisionedCallAgents
Version 5.0
Table 11-6: Common Control Parameters
Description
functioning for vendor-
specific compatibility. Refer
to the product's User's
Manual.
Range: Integer > 0
Refer to the product's User's
Manual or the enumerator
mgTMGCPProfile for
possible values.
Defines the default
packetization period (Frame
Size).
This parameter can be used
to set a default coder for
channel opening. For the
legal coder names, refer to
the product's User Manual.
Default =
cpDPT_G711Mulaw_Coder
Defines if the detection of
DTMF events is notified at
the end of DTMF or at the
start of DTMF.
0 = at start of DTMF
1 = at the end of DTMF
Controls protocols
retransmission timeout. Sets
the initial time (in msec) for
the first retransmission. The
retransmission intervals
thereafter increase
exponentially.
Sets the initial time for the
first retransmission. The
Retransmission intervals
thereafter increase
exponentially.
Controls the protocols
Congestion Performance
Monitoring Hysteresis Value.
Use this parameter to define
a list of up to 10 (MGCP) or 5
(MEGACO) legal IP
addresses separated by ',' or
';' for the ServiceChange
command. The gateway
345
11. Appendix - Individual ini File Parameters
Host/Manual
Default Value
20
G.711
1
200
200
2
NULL
Valid Range
5 to 120
See Descr.
0 or 1
0 to 10000
0 to 65535
1 to 20
See Descr.
June 2006