Figure 8-75: File Loading Dialog Screen - AudioCodes Mediant 2000 User Manual

6. Click the Send File button to send the file to the device. The File Loading screen
appears with a progress bar indicating the loading period. When the loading is
complete, a message is displayed indicated the file was successfully loaded into
the device.
All four buttons (Cancel, Reset, Back, and Next) in the bottom portion of the
screen are activated.
7. You may choose between these options:
•
•
•
8. Loading Additional Auxiliary Files
To move to the next file type on the list to the left, click the Next button. The File
Loading screen appears with the next relevant file type highlighted.
For each file type the user has three options:
•
•
•
User's Manual

Figure 8-75: File Loading Dialog Screen

Loading Additional Auxiliary Files
Completing the Software Upgrade Process
Cancel Upgrade Process and revert to the Previous Configuration Files
Load a new auxiliary file to the device using the Browse and Send File'
button as described above.
Load the existing auxiliary file - A checkbox (checked by default as shown in
the figure below) appears if relevant to the device. If this checkbox is
checked, the existing file is used in the upgraded system.
Avoid loading any file at all - Clear the checkbox (if the checkbox appears).
258
Mediant 2000
Document # LTRT-69805