Figure 8-73: Start Software Upgrade Screen - AudioCodes Mediant 2000 User Manual

3. On the sub-menu bar on the top, click the Software Upgrade Wizard link. The
Start Software Upgrade screen appears.
Note:
User's Manual

Figure 8-73: Start Software Upgrade Screen

At this point you may cancel the Software Upgrade process with no
consequence to the device by using the cancel button. If you continue with
the Software Upgrade process by clicking the Start Software Upgrade
button, the process must be followed through and completed with a device
reset at the end of the process. If you use the Cancel button, in any of the
subsequent screens, the Software Upgrade process causes the device to be
reset.
256
Mediant 2000
Document # LTRT-69805