Media Processing Parameters - AudioCodes Mediant 2000 User Manual

ini File Parameter Name
VLANControlVLANID
VLANGoldServiceClass
Priority
VLANHeartbeatVLANID
VLANMediaVLANID
VLANMode
VLANNativeVLANID
VLANNetworkService
ClassPriority
VLANOAMVLANID
VLANPremiumService
ClassControlPriority
VLANPremiumService
ClassMediaPriority
VLANSendNonTagged
OnNative
11.1.4

Media Processing Parameters

The table below lists and describes the Media Processing parameters contained in the
ini file. Use this table as a reference when modifying ini file parameter values.
The table below lists and describes the Media Processing parameters contained in the
ini file. Use this table as a reference when modifying ini file parameter values.
User's Manual
Table 11-3: Infrastructure Parameters
Description
Sets the control VLAN
identifier.
Sets the priority for the Gold
service class content.
Sets the heartbeat stream
VLAN identifier.
Sets the media VLAN
identifier.
Sets the VLAN functionality.
0 = Disable
1 = Enable
2 = PassThrough
Sets the native VLAN
identifier.
This parameter is used to set
the priority for Network
service class content.
Sets the OAM (Operation,
Administration and
Management) VLAN
identifier.
Sets the priority for the
Premium service class
content and control traffic.
Sets the priority for the
Premium service class
content and media traffic.
Specify whether to send non-
tagged packets on the native
VLAN. By default, priority-
tagged packets (vlanId=0)
are sent.
324
Host/Manual
Default Value Valid Range
2 1 to 4094
4 0 to 7
0 0 to 4094
3 1 to 4094
0 0 to 2
1 0,1
7 0 to 7
1 1 to 4094
6 0 to 7
6 0 to 7
0 0-1
Document # LTRT-69805
Mediant 2000