Table 7-23: Signal Combination Options For Cas Support - AudioCodes Mediant 2000 User Manual

User's Manual
Group 1
andisp/* (cpSignal)
aasb/* (cpSignal)
nttrk/* (cpSignal)
ctyp/*

Table 7-23: Signal Combination Options for CAS Support

Group 1
ToneGen/*
an/*
ct/*
alert/cw
bcasaddr/addr
oses/*
osext/*
icas/congestion
icas/status
icasc/*
aasb/*
nttrk/*
ctyp/*
A signal list can contain up to 30 signals in the list, and they are played sequentially
until the list ends or the execution is interrupted.
Interrupting the execution can be one of the following:
Event - Only events required by the Call Agent stop the execution, and only if
they do not have the KeepActive flag.
New Signals Descriptor - Stops the execution, unless the same signal is received,
and it has a KeepActive flag. If the old signal and the new signal are both signal
lists and have the same ID, the new signal is ignored.
Subtracting the termination from the call
When a signal is ended, a signal completion notification is sent only if:
Version 5.0
Table 7-22: General Signal Combination Options
Notes
Only when analog
board
Including all the
inheriting packages
Notes
Including all the
inheriting packages
Including all the
inheriting packages
Group 2
gb/*
bt/*
Group 2
bcas/sza
bcas/ans
bcas/idle
rbs/*
icas/cf
icas/cb
icas/rlg
casblk/*
Bcas/sz
119
7. Standard Control Protocols
Notes
(3G)
(3G)
Notes
June 2006