Figure 8-41: Mtp2 Attributes Screen; Ss7 Signaling Node Timers - AudioCodes Mediant 2000 User Manual

User's Manual
2. From the sub-menu bar on the top, move the cursor on the SS7 Configuration
link. A drop-down menu appears. Click on the MTP2 Attributes option. The
MTP2 Attributes screen appears.
3. Use the table, ''SS7 Parameters'' on page
Parameters' on page
the MTP2 Attributes screen.
4. After configuring/modifying the parameter fields, click the Create button. The
changes are entered into the system and the screen is refreshed.
8.2.8.12.2

SS7 Signaling Node Timers

To configure the SS7 Signaling Node Timers, take these 4 steps:
1. From the main menu list on the left, click on the Advanced Configuration link.
The Advanced Configuration screen appears.
Version 5.0

Figure 8-41: MTP2 Attributes Screen

369 as a reference when configuring/modifying the fields in
225
8. Mediant 2000 Management
337 in the Appendix, 'Table
June 2006