Chapter 4
Preparing for Maintenance
This chapter describes the preparations that must be completed prior to performing
any maintenance as well as the types of maintenance.
Preparing Tools Required for Maintenance
■
Confirming the System Configuration
■
Understanding Types of Maintenance
■
4.1
Preparing Tools Required for
Maintenance
This section explains tools required for maintenance.
for maintenance on a Field Replaceable Unit (FRU).
Table 4-1
1
2
3
4
4.2
Confirming the System Configuration
This section explains how to check the hardware and software configurations.
After completing any maintenance, it is necessary to confirm that the the system
configuration is the same as that before starting the work. If an error occurs in the
Maintenance tools
Item
Phillips screwdriver (No.2)
Flathead screwdriver (small)
Wrist strap
ESD mat
Table 4-1
Use
Removing or replacing screws
Removing or replacing screws
For static grounding
For static grounding
lists the tools required
41