Blocking A Subscriber Interface {Subscriber Interfaces; Updating The Ag 5500 Firmware {Upgrade - Nomadix AG 5500 User Manual

Blocking a Subscriber Interface {Subscriber Interfaces}

The AG 5500 allows System Administrators to block subscriber interfaces.
From the Web Management Interface, click on
1.
The Subscriber Interfaces screen appears:
Enable or disable the following items by clicking on the corresponding check box:
2.
Block Subscriber Interface 1
Block Subscriber Interface 2
Click on the
3.
values to their previous state.

Updating the AG 5500 Firmware {Upgrade}

Upgrading the AG 5500 firmware is performed from the AG 5500's Command Line Interface
(CLI) only. Refer to the Firmware Upgrade Procedure (separate document available from
Nomadix Technical Support).
244
button to save your changes, or click on the
Submit
, then
System Subscriber Interfaces.
Reset
System Administration
AG 5500
button to reset all