Viewing The History Log {History - Nomadix Access Gateway User Manual

From the Web Management Interface, click on
1.
screen appears:
2. Enable or disable the
3. If you enabled Fail Over, define the
Enter an IP address in the
4.
Define the port in the
5.
Select the
6. Secondary To Primary Fail Over Time
Secondary will wait while not receiving messages from the Primary before it takes over.
7. Click on the check box for
If you are using RADIUS, it is recommended to add both Nomadix gateways to the
RADIUS server.
Click on the
8.
values to their previous state.

Viewing the History Log {History}

You can view a history log of the system's Access, Reboot, and Uptime activities. The history
log contains up to 500 entries. Over 500 entries and each new log item removes the oldest entry
in the list. The latest entry is always at the top of the list.
226
Fail Over feature, as required.
Sibling IP Address
Fail Over Port
Reboot after changes are saved?
button to save your changes, or click on the
Submit
, then
System
Sibling Status (Primary or Secondary).
field.
field.
. The time set here is how long the
A G
CCESS ATEWAY
The Fail Over
Fail Over.
button to reset all
Reset
System Administration